DEEN

Accessory - does it make sense or is it just Voodoo?

A consideration on the introduction of the Silentplugs

A lot of people doubtfully look towards audio accessories. So many products abd their effectiveness can´t be explained  and so they only seem to be daylight robbery, clever marketing or even just Voodoo! Especially critical when another phenomenon comes that way: the first listener remarks a change, the next doesn´t hear anything and the third person feels insecure. And when even the press covers the range from "sensational" to "nonsense" the uncertainty is perfect.

So finally  the objectivity gets lost and scientific approaches cannot be found. We do not negate any new ideas, any approach - everything will be checked. But we personally do prefer products or measures where a) the effect instantly can be reproduced and b) that can be explained anyhow or taht can - in the ideal case - be proven by measuring.Audio Exklusiv concentrates - due to a long and intensive research - on a sector which has, in our opinion, the greatest influence / effect on the sound: the mechanical component.

 

The unit - a complex item

What happens inside the unit? FInally a unit is nothing more but a complex frequency response system, which wll be inspired not only by the direct airborne sound (such as cabinet, circuit board, parts, sockets or inner cables) but also by the indirect airborne sound (e.g. underground, bases, cables). Even transformer vibrations or the electricity that circulates through the parts generate a certain "independent existence".

All these interferences overlay in phase or out of phase itself or the original music signal. These facts will lead not only to tonal modifications and colourations, but also to the influence of the space reproduction, dynamic and also the distortion characteristics. The extremes are well known: certain products sound per se e.g. brightly, metallic and nervous, really scratchy, others however are round, extremely warm, slow - apart from dome exceptions the mechanical condeption of the devices (and consequently teh undergound) can be made resonsible for there phenomena.

 

The Solution

At this point the concept from Audio Exklusiv comes into the game and moves like a central theme through the whole product line. This does however not mean taht a single Audio Exklusiv product does not show an effect or does not sound marvelously. But in combination of all products - that means: base, fett unit and plugs - the result is absolutely impressing. In that way the units can show what has really been saved on the sound storage medium. Our concept is quite simple: first a nearly perfect decoupling from the underground has to be reached, without projecting new distinctive resonances into the unit. In order to reach this, two materials play a decisive role: the material for decoupling and teh material of the underground. Here we use the d.C.d Base. In the next step itßs important to calm the cabinet and to minimize teh system immanent resonances and distortions. Our d.C.d. feet will take over this job. With the silentplugs further resonances in the area of the connections will be absorbed.
With these measures approx. 75% of the possible mechanical improvements have been reached. The next step is more complex, because an intervention in the unit is necessary. As we use them also for our own products we use special board distance pieces, attachment materials and calmed control elements. (by the way: in our category "Tuning" we offer such measures also for products of other manufacturers).

With our successful d.C.d. Feet and d.C.d. Base we always amaze the press, dealers and end consumers. Such a positive modification without a tonal influence, but on the other side drastical improvements concerning distortion, outlining and releasing from the loudspeakers has never before been heard in this way. For many music lovers the combination of Feet and Bese in the meantime is an absolutely "must have".

Our Silentplugs now complete the range, optimizing a sector that never before had been considered: the connection sector (cinch connectors). As an additional function the unused connectors will be closed against radiation. The main job however is once again carried out by our patented resonance absorbing material. It calms above all the cinch connectors and their periphery: the connector housing, the innerconstruction with the contact spring, the cabling, the rear panel / housing influences, maybe the board on which the connectors directly assembled - all these vibrations, resonances and resulting distortions will be absorbed. Even a digital input/output shows a drastic effect.

The Silentplug is a complex construction: a milled aluminium plug, lined in the inner with our special material, the specially worked out the plug nose - made out of the same material, the housing bwith a damping shrink sleeving - inconsiderable and supposed to be simple, but highly effective. The result speaks for itself: the sound is becoming cleaner, more structureed and better to hear through, the resolution and fine information become more, distortions and uncleanness will be reduced dramatically, the dynamic (groos and mainly fine dynamics) grows, the sound pattern releases from the loudspeakers. Emotions and the musical flow come into the foreground.

The effects of the three accessories are simliar and they do complete each other perfectly. A unit, completely equipped with those will play better for two or three classes. The financial effort is much less as if one buys the would-be-better-product for a much higher price. And: the results of the measures can metrological been reproduced.

But keep in mind that not all products show the same results.Components such as housing conception are playing an important role an on the other side it depends  on the entire chain.

 

 

 

 

d.C.d. Base

(click to enlarge)

The reason for this development is the always existing mechanical problem which is - in spite of using phantastic racks – basically present. This concerns both audio- and visual-equipment.
Vibrations – caused by agitation and/or airborne sound - which excite the products up to the particular components and that will lead to an unclean and falsified signal.

d.C.d. means deCoupling damping. This is a combination of decoupling and damping technologies realised with only one base, which helps to damp resonances as well as it decouples the product from the underground. This happens without any displacement of resonances into acoustic agreeable regions or a reduction of dynamic. Loss of dynamic is – in nearly every case – the result of such damping measures.

The base consists of two MDF-elements. The upper part additionally is combined with a special damping material in order to present a best possible audible underlay.
Between the two MDF-elements there is a complex special mesh, which brings an ideal decoupling from the underground.
The result shows: The sound is getting cleaner, distortions and uncleanings are considerably reduced, the sound pattern is getting more structured, better to hear through and disconnects completely from the speakers, and the dynamic (the rough and mainly the fine-dynamic) is increasing considerably.

We kindly ask you to take care that there are differences between the particular products: the result of one and the same measure can differ from product to product. The housing conception and e.g. the mechanical build-up of each component hereby play an important role.  

The dimensions/load are:

Base 1: 500 (W) x 450 (D) x 40 (H) mm, max. load 45 kg.

Base 2: 450 (W) x 400 (D) x 40 (H) mm, max. load 40 kg.

Base 3: 400 (W) x 300 (D) x 40 (H) mm, max. load 30kg.

 

Special dimensions and paintings on request.

d.C.d. Feet

(click to enlarge)

The reason for this development is the always existing mechanical problem which is - in spite of using phantastic racks – basically present. This concerns both audio- and visual-equipment.
Resonances and vibrations – caused by agitation and/or airborne sound - which excite the products up to the particular components and that will lead to an unclean and falsified signal.

d.C.d. means “deCupling damping“. This means a combination of decoupling and damping technologies in a new kind of underlay foot, which helps you to damp resonances as well as to decouple in an optimal way the product from the underground. This happens without any displacement of resonances into acoustic agreeable regions or a reduction of dynamic. Loss of dynamic is – in nearly every case – the result of such damping measures.
The feet consist of two special aluminium elements. The upper part is additionally combined with a special acoustic damping material in order to reach a damping and elimination of resonances.
Between the two aluminium-elements there is a complex special mesh, which cares for an ideal decoupling from the underground. The lower part is additionally decoupled from the underground by a felt wheel.
The result shows: The sound becomes cleaner, more structured and better to hear through, distortions and uncleanings are considerably reduced, the dynamic (the rough and mainly the fine-dynamic) will be increased and the sound pattern disconnects completely from the boxes.

We kindly ask you to take care that there are differences between the particular products: the result of one and the same measure can differ from product to product. The housing conception and e.g. the mechanical build-up of each component hereby play an important role.  

The diameter is 55 mm, the 4 piece set can be stressed with maximum 24kg in total.

Silentplugs RCA

(Klicken zum vergrößern)

With the silentplugs we continue our successful line-up of resonance and distortion absorbing accessory products. The special material which we use for our d.C.d. Feet as well as for our units plays also an essential role for the silent plugs.

Without any colouriation or negative dynamic influence all mechanical perturbations and electrical radiation in the area of the cinch connector or of the connector panel are completely eliminated. No matter which unit of the equipment, if unused inputs or outputs - even digital connectors show striking effect. Resonances and distortion are dramatically reduced, which makes the sound more sophisticated, more hear through, more detailed, more space and coloured - more dynamic and much more emotions will appear.

The silentplugs are available in 2 pcs. or 4pcs. sets.

 

Silentplugs Banana

(Klicken zum vergrößern)

With the silentplugs Banana we continue our successful line-up of resonance and distortion absorbing accessory products. The special material which we use for our d.C.d. Feet as well as for our units plays also an essential role for the silent plugs.

Without any colouriation or negative dynamic influence all mechanical perturbations in the area of the binding posts are completely eliminated. Used on amplification and / or speakers side they are showing a striking effect. Resonances and distortion are dramatically reduced, which makes the sound more sophisticated, more hear through, more detailed, more space and coloured - more dynamic and much more emotions will appear.

The silentplugs banana are available as 4pcs. set.

 

Silentplugs XLR

The Silentplug XLR (female) is now completing the successful line-up of resonance and distortion absorbing accessory products. The special material which we use for our d.C.d. Feet as well as for our units is  also the key factor for the Silentplug XLR.

Without any colouration or negative dynamic influence all mechanical perturbations and electrical radiation in the sector of the cinch connector or of the connector panel are completely eliminated. No matter which unit of the equipment, if unused inputs or outputs – even digital connections show striking effect. Resonances and distortion are dramatically reduced which makes the sound more sophisticated, more hear through, more detailed, more space and coloured – more dynamic and  much more emotions will appear.

The Plug is milled from a solid aluminium part and matt black anodised.

 

 

 

 

Silenthead


The lineup of resonance- and distortionabsorbing accessories actually has been completed by the „Silenthead“. The special material, which we use for our appliances as well as for the accessories even here plays the essential part. The Silenthead has to be mounted between pick-up and headshell of the tone-arm. It´s conception guarantees a sure and stable seat. The combination of black acrylic and our damping material eliminates nearly completely perturbations which are caused  mechanically (e.g. modulations by the tracking, resonances, vibrations,...). Without any tonal colouration resonances and distortions now are drastically reduced and the sound is getting sophisticated, better to hear through, more detailled, airy and more coloured – dynamic and emotions will be considerably increased. The combination of system and tone-arm surpasses clearly its own price-category.


Silentpucks


Even for CD-player with a Philips drive (top loader) there are now available our new resonance- and distortion-absorbing accessories with the special material which we already use for our devices and for most of our other components. The Silentpuck is to be used instead of the so original puck. Even the size of the puck ensures that the CD will be calmed down and that possible vibrations will be eliminated as far as possible. Furthermore mechanically caused perturbations which appear by airborne sound and subsonic noise as well as perturbations by gear and rotation will be – thanks to the combination of black acrylic and our damping material - eliminated nearly entirely.

Without any tonal colouration resonances and distortions will be dramatically reduced  by this way, and even the sound is getting more contoured, more structured, better to hear through, full of details, with more space and more colourful – the dynamic as well as the emotions will considerably be increased.